ConeTwistJoint¶
Inherits: Joint < Spatial < Node < Object
Category: Core
Brief Description¶
A twist joint between two 3D bodies.
Member Variables¶
- float bias - The speed with which the swing or twist will take place.
The higher, the faster.
- float relaxation - Defines, how fast the swing- and twist-speed-difference on both sides gets synced.
- float softness - The ease with which the joint starts to twist. If it’s too low, it takes more force to start twisting the joint.
- float swing_span - Swing is rotation from side to side, around the axis perpendicular to the twist axis.
The swing span defines, how much rotation will not get corrected allong the swing axis.
Could be defined as looseness in the ConeTwistJoint.
If below 0.05, this behaviour is locked. Default value: PI/4.
- float twist_span - Twist is the rotation around the twist axis, this value defined how far the joint can twist.
Twist is locked if below 0.05.
Enums¶
enum Param
- PARAM_SWING_SPAN = 0 — Swing is rotation from side to side, around the axis perpendicular to the twist axis.
The swing span defines, how much rotation will not get corrected allong the swing axis.
Could be defined as looseness in the ConeTwistJoint.
If below 0.05, this behaviour is locked. Default value: PI/4.
- PARAM_TWIST_SPAN = 1 — Twist is the rotation around the twist axis, this value defined how far the joint can twist.
Twist is locked if below 0.05. - PARAM_BIAS = 2 — The speed with which the swing or twist will take place.
The higher, the faster. - PARAM_SOFTNESS = 3 — The ease with which the joint starts to twist. If it’s too low, it takes more force to start twisting the joint. - PARAM_RELAXATION = 4 — Defines, how fast the swing- and twist-speed-difference on both sides gets synced. - PARAM_MAX = 5 — End flag of PARAM_* constants, used internally.